同城彩票注册

Products

Products

 Swith Power MCP400-5412

Swith Power MCP400-5412

Swith Power MCP400-5412

Product overview Product parameters

Swith Power MCP400-5412,Reference product parameters

INPUT SPECIFICATIONS

GENERAL SPECIFICATIONS

Input Voltage 90~290VAC
Efficiency 20% load efficiency85%;50%/100%load efficiency89%
Frequency 45~65Hz
Isolation 3000 VAC – Input to Output
Maximum Input Current    6A max. at full load

SAFETY

Inrush current (cold start)    40A typ. peak, 220VAC
The power supply shall comply with the following criterion:
Power Factor 400W
 1) GB4943.1,IEC60950-1
input under-voltage ≤80VAC shutdown,75~90VAC recovery
 2) CCC,CB
Leakage Current <0.25mA@230VAC

ENVIRONMENTAL SPECIFICATIONS

Input protection T15A/250VAC
Operating Temperature    -25℃ to +55℃. (start up properly with full load when the temperature reaches -40℃)

OUTPUT SPECIFICATIONS

Storage Temperature -40℃ to +70℃
Output Voltage +54V/+12V

OTHER SPECIFICATIONS

Rated current 6.9A@54V /3A@12V
Altitude 5000M (max).
Line Regulation ±1%
Cooling Method The power module is placed inside the case and cooled by the case fan
Output voltage regulated accuracy    ±3%
Vibration 10-500Hz, 19.6m/s²(2G), 30minutes each
Transient-dynamic response    25~50% load & 50~75% load
  along X, Y and Z axis.
  0.25A/uS
Dimension 220*100*38mm(L*W*H)
Ripple / Noise 300mVp-p@54V /200mVp-p@12V
Weight 730g
Switch-on delay 1second max@ 220VAC
Hold-Up Time ≥20ms@ 220VAC
Over-Voltage 57~62V @54V /13.8~16V@12V
  Hiccup output,  self-recovery after cancellation, 
  non-external voltage irrig ation
Over-Load 8A-13.5A@54V /5.5A~13A@12V
Short Circuit Hiccup Mode
新火彩票网 大有彩票平台 王者彩票开户 同城彩票开奖 完美彩票注册 同城彩票计划 新火彩票注册 天娱彩票官网 博乐彩票开奖 新火彩票平台